THE SUITABILITY OF MAIZE COBS FOR THE PRODUCTION OF PARTICLE BOARD

dc.contributor.authorZUBAIRU, Ibrahimu Khalilullahi
dc.date.accessioned2015-07-30T14:12:54Z
dc.date.available2015-07-30T14:12:54Z
dc.date.issued1989-10
dc.descriptionA thesis submitted to the Postgraduate School, Ahmadu Bello University, in partial fulfilment of the requirements for the award of Master of Science (Construction Technology) Department of Building Faculty of Environmental Design Ahmadu Bello University Zarla - Nigeria OCTOBER, 1989en_US
dc.description.abstractA study was carried out to investigate the suitability of the maize cob (Zea mays) for particle board manufacture. The purpose was to examine general limits within which a satisfactory board can be made with this agricultural residue. The maize cob was found to consist of pith, wood-blast and cortical layer or chaff. Samples of particle board were produced from the maize cob collected from farms around Samaru Village. A liquid resin of "Gum Arabic" was used in six concentration levels: starting from 9, 10, 11, 12, 13 and 14 percent based on the oven-dry weight of maize cob particles. Some selected physical and mechanical properties of the boards were evaluated. The results were compared with the data available from the present standards. All samples satisfied the standard requirements except for "water absorption" and "thickness swelling" tests. This may be due to non-addition of wax during the manufacturing process. It was generally observed from the results that the maize cob is a good material for particle board manufacture and its properties were consistently dependent on the resin concentration levels and densityen_US
dc.identifier.urihttp://hdl.handle.net/123456789/6716
dc.language.isoenen_US
dc.subjectSUITABILITY,en_US
dc.subjectMAIZE COBS,en_US
dc.subjectPARTICLE BOARDen_US
dc.titleTHE SUITABILITY OF MAIZE COBS FOR THE PRODUCTION OF PARTICLE BOARDen_US
dc.typeThesisen_US
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
THE SUITABILITY OF MAIZE COBS FOR THE PRODUCTION OF PARTICLE BOARD.pdf
Size:
5.12 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.58 KB
Format:
Item-specific license agreed upon to submission
Description: